Air Duct Cleaning In Falcon, CO

Air duct cleaning in Falcon homes typically takes 4-5 hours depending on the sq. feet and amount of air vents in the home. 

• Vacuum Attachment – We attach our high powered vacuum debris collection system to the HVAC system to put a negative air pressure on the duct system.  For the vacuum, we need an access point (a hole) for the supply line and return trunk line.  If your home has had it’s air ducts cleaned before, then we can access that previous hole, but many times we will have to cut a new hole in the duct for vacuum access.  In the end, the holes will be plugged and sealed for an air tight system.   This is not unusual.  For proper duct cleaning, this is required.

• Agitate / Loosen The Debris – To remove all the built-up debris in the duct system, we need to loosen everything up.  There are two main processes of agitation typically used by the top professionals in the air duct cleaning industry.  The first method is using a rotary brush (typically used for hard round ducts) that does a lot of heavy work.  The second is a highly accepted industry standard by using an air whip, which is more gentle in the vent returns and the main trunk lines for the HVAC system.  Mountain Air Duct uses both of these agitation processes! At the time of service, we will determine the best option to clean your air ducts thoroughly, while keeping them undamaged.  

• Remove The Debris – Once the dust and debris has been loosened within the ducts,  we push the contaminants toward the exit point where the HEPA Vacuum is collecting all the debris.  The 5000 CFM vacuum is the best in the industry by pulling all the debris out without anything getting back into your home.